◇ CS-2000 double furnace infrared carbon and sulfur analyzer CS-2000 double furnace infrared carbon and sulfur analyzer is a world's leading technology of high-tech carbon and sulfur analyzer produced by ELTRA company in the new century. It has the advantages of automatic switching, high sensitivity, good performance, accurate results and wide measurement range and types. It is capable to analysis the carbon and sulfur content in steel, cast iron, alloys, metals, minerals, ceramics, cement, lime, rubber, coal, coke, carbide, graphite, oil, catalyst, soil, garbage, tobacco, vegetables, ash, sand, glass and other solid and fluid materials. | | | | | ◇ ONH-2000 oxygen and nitrogen hydrogen detector ONH-2000 is specifically for the rapid, accurate measurement of oxygen, hydrogen and nitrogen content in copper, steel, iron, alloys, titanium, nickel, ceramics, and other inorganics. ONH-2000 can provide two independent infra red cells detecting hypoxia and hyperoxia. The process of analysis can be automatically switched from low to high range without any artificial set. ONH-2000 has a 16-bit microprocessor and a solid state infrared detector with auto-zero and automatic control properties. Samples placed in graphite crucible furnace can be heated to 3000° C and above by the high-power pulse. This furnace is cooled by circulating water. According to user’s needs, the test range can be optimized in the process of production for free. Detector sensitivity can be adjusted from ppm to percentage. | ◇ CS-800 carbon and sulfur analyzer Integrated with the state-of-art combustion technology,CS-800 can quickly analyze the carbon and sulfur content in steel, cast iron, copper, alloys, ores, cement, ceramics, carbon compounds, minerals, sand, glass and other solid materials. CS-800 can provide four independent IR cells which can analyze at different sensitivity according to user requirements. CS-800 is equipped with a 16-bit microprocessor, an induction furnace and an auto-zero solid infrared detector. It can automatically switch the range scope. | | | | | ◇ ONH-900 oxygen and nitrogen hydrogen detector ONH-900 is specifically for the rapid, accurate measurement of oxygen, hydrogen and nitrogen content in copper, steel, iron, alloys, titanium, nickel, ceramics, and other inorganics. ONH-900 can provide two independent infra red cells detecting low-oxygen and high-oxygen. The process of analysis can be automatically switched from low to high range without any artificial set. ONH-900 has a 16-bit microprocessor and a solid state infrared detector with auto-zero and automatic control properties. Samples placed in graphite crucible furnace can be heated to 3000° C and above by the high-power pulse. This furnace is cooled by circulating water. According to user’s needs, the test range can be optimized in the process of production for free. Detector sensitivity can be adjusted from ppm to percentage. |
|
No comments:
Post a Comment